Bc2000 (for the BCF2000 & BCR2000)

Well, it seems I have to answer my own question, but i document it here
for later reference for myself and others.

It took me a lot of digging but on some forum i found out i should use
the MCSo mode on the BCF2000 with Audition, and then in the release
notes for firmware 1.07 (!) i stumbled upon pictures of the layout of
all the knobs (by accident!). When using the buttons labeled Store and
Edit i can finally control EQ and PAN.
And when using BCFview i can finally see what i'm doing.

I still have a few problems to solve though:

- i can't turn 2 panpots at the same time, this freaks Audition out, it
keeps swapping between 'selected' channels
- i need to rotate the controls way too much before i get pan full L or
full R. The resolution is just too high. Can this be altered?
- With the faders all the way down audition sees level as -160 dB, not
-endless
- I want to use all rotators for EQ parameters on one channel, as
opposed to using one rotator and having to step through parameters
- i'd like to assign one button as REC instead of having to press
shift-play to record.

Any input would still be welcome.

Hmm, i just got mail: somebody offers me a Tascam US2400.