Bc2000 (for the BCF2000 & BCR2000)

It was the BCF not being recognized under the MIDI settings so it
could be selected as input/output for the controller.

It was weird but I REALLY appreciate the help.


--- In bc2000@yahoogroups.com, "Karl Lurman" <karl.lurman@...> wrote:
>
> Sorry, I had you all confused. I assumed you were talking about visual
> output, not midi device output...
> 
> Karl
> 
> On Wed, Jul 30, 2008 at 6:35 AM, schivins <babylon05@...> wrote:
> > I got it working. I kept playing with it and it now shows up under the
> > MIDI list.
> >
> > Thanks for the help.
> >
> > --- In bc2000@yahoogroups.com, "Mark van den Berg" <markwinvdb@>
wrote:
> >>
> >> --- In bc2000@yahoogroups.com, "schivins" <babylon05@> wrote:
> >> > Weird thing is I also tried Behringer's own USB driver (vs.
1.2.1.3)
> >> > . Instead for USB Audio the device manager listed BCF.. However
when
> >> > this was listed nothing worked at all. IS this listed in your
device
> >> > manager as BFC...(I cannot remember exactly) and it is working for
> > you?
> >>
> >> The Behringer USB driver vs. 1.2.1.3 ends up in Device Manager as
> >> "B-Control Midi (10/19/2005,1.2.1.3)" under "USB Composite Device".
> >> Works perfectly in my case.
> >>
> >> One thing: if you go to the USB driver's "Properties" -> "Properties"
> >> -> "MIDI Devices and Instruments" -> "Behringer MIDI Device" and
click
> >> the "Properties" button, "Use MIDI features on this device" should be
> >> selected, otherwise things won't work. (I can't imagine that this is
> >> the problem, since this setting is the default, but you might
check it
> >> just to be sure.)
> >>
> >> By the way, I would recommend you try fixing your USB driver problem
> >> in normal BCF mode, not in some emulation mode, because in an
> >> emulation mode USB/MIDI connectivity is harder to test - once
> >> bidirectionality does work in normal BCF mode, you can try emulation
> > mode.
> >>
> >> If you're very unlucky, you might have one of those BCFs/BCRs with a
> >> defective USB controller - several people have reported this in our
> >> group over the last year or so. E.g. my own BCR habitually stopped
> >> sending data to the computer (ultimately I had it replaced at the
> >> shop), and Royce has reported a horror story concerning a string of
> >> BCFs that (if I remember correctly) didn't receive data from the
> > computer.
> >>
> >> > This is just weird. I sent Behringer a support email, maybe
they can
> >> help.
> >>
> >> I'm sure they CAN, the question is whether they WILL!
> >>
> >> Good luck!
> >> Mark.
> >>
> >
> >
>