Bc2000 (for the BCF2000 & BCR2000)

Turn the RxChannel on the BC to channel 15

Load MidiOx

Set up a Data map
Ch=15  Event=NoteOn  Min=60 Max=91  -1 -1
Ch=15  Event=ProgChg Min=1  Max=32  -1 -1
Link the KB's Midi the BC in the Midi Port Routing

Middle C (Midi Note 60) is Preset 1 then change presets chromatically up.

All the best

Royce

--- In bc2000@yahoogroups.com, "sexontony" <sexontony@...> wrote:
>
> Is it possible with BC Manager 1.4.0 to change BCR2000 presets 1..12 
> via midi notes e.g. 84..95 on the midi channel 15? (If yes, how?)
> 
> My controller context here is music production.
> 
> Solving this "problem" would allow us not to work just with a single 
> preset in a "musical session" but could freely combine multiple 
> presets with each other and easily switch between them using simple 
> single midi note events in a predefined space (e.g. here midi channel 
> 15).
> 
> Then you could e.g. build a setup for 8 tracks (per each BCR 2000) 
> and control various aspects of these 8 tracks by switching among 
> predefined presets. Some ideas what those presets could do:
> 
> 1.  volume adjustments (midi ch 1)
> 2.  eq adjustments (midi ch 2)
> 3.  compressor adjustments (midi ch 3)
> 4.  efx adjustments (midi ch 4)
> 5.  balance adjustments (midi ch 5)
> 
> By giving each aspect its own preset you can eliminate unnecessary 
> "crazy cross thinking" what is defined where and how we should switch 
> there most efficiently.
> 
> Any ideas, comments and hints?
>