Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "islandgroove2002"
<islandgroove2002@...> wrote:
> Thanks for your help, so far so good with your instructions up until 
> receive ident which is only working with one Behringer device at a 
> time. 

> If I remove the "safe" .ini file the errors continue upon launch 
> although I did manage to click through "both" error boxes quick enough 
> to get into the program.
> Then I disabled all of the uneeded midi ports and set the midi channels 
> for both Behringers.Once again only the Identity for one device is 
> shown.

Very strange. Does this also happen when you execute "Receive
identity" manually from the "B-Controls" window for the unrecognized
Behringer?
And does it help to increase "Waiting time ..." (e.g. to 1000 msec) in 
the "Detect B-Control options" dialog box?

> Just for "fun" I re-enabled all of the midi ports and everything still 
> works without any error messages.

I haven't had time yet to really get to the bottom of this problem,
but in the new version of BC Manager (1.4.0) you can at least skip the 
auto-detection on first startup (i.e. when no previous ini-file
exists), so that should help a bit. So you shouldn't need the special
"safe" ini-file any more - but you still might have to set "Startup
detection" in the "Detect B-Control options" dialog box to "None".

Mark.