Message
Re: LED Feedback, Mackie mode, custom script
2008-04-07 by rpcfender
> value/position displayed in Live, no matter if it's a Pan, Send or
> Rack Macro. Its like they are running at different resolutions or
> something.
>
> I thought I would try changing the 12 to a 15 seeing as there is 15
> leds on each ring but this killed all the feedback & gave an error
> when loading in to the bcf.
From Mark's BCL pdf
Encoders 1-32:
Mode {off, 1dot, 1dot/off, 12dot, 12dot/off, bar, bar/off, spread, pan, qual,cut, damp}
So as you can see there isn't a 15dot.
Perhaps it is the range that you have set
ie .minmax 0 127
but it should be .minmax 0 100
Use MidiOx to have a look at the Midi messages. Are they in sync with the Live display?
All the best
Royce