Analogue systems

Great midi news - thanks!

I'll order my blacet modules and see if they work...

Does anyone know if the cheap doepfer 5v adapter will work in a AS system (with the 
adapter ribbon)? I need to power a doepfer midi - cv. 

Thanks


> You can do this. If the midi sampler you're speaking of has a midi
> implementation chart, you can use any voltage source as a controller via the
> A192.
> 
> Regarding the Blacet: Some of his modules will work OK with 12 volts, not
> all.  Otherwise, there was a way to power them with a wallwart.  Write John.
> I recenty spoke with him and he mentioned he's out of town for the holiday
> until Monday, but he's very helpful about this stuff.
> 
> 
> 
> stevenemilie wrote:
> 
> > Does anyone know if I can use the doepfer A192 cv - midi interface to control
> > a midi 
> > sampler with my AS sequencer?
> > 
> > Also I'd like to mix some blacet modules with my AS setup - is there any way
> > of 
> > powering them from the AS supply? I don't want to spend a fair bit just to
> > power the 2 
> > blacet modules that I want...
> > 
> > I'm new to this and haven't quite got my head around it!
> > 
> > 
> > 
> > To unsubscribe from this group, send an email to:
> > analogue_systems-unsubscribe@yahoogroups.com
> > 
> > 
> > 
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> > 
> >