Analogue systems

hi nectarie,
basically you'll need the converter cables!you must
check if you have them first!the AS cables and the
doepfer cables are NOT the same!!!!check this before
you destroy something!
bakis.


--- nectarios01 <nectariosm@hotmail.com> wrote:
> Thanks Bakkis and shm. Yes Bakkis,I am from Greece,
> born and raised 
> in Athens, but have been living in the UK for the
> last 4 years. I 
> have checked my cables and they seem to do that
> twist to get the red 
> line from top to bottom. My RS 110 module cable does
> not do that 
> though, I'll check it out right after work to see if
> the red wire 
> goes from 0V on the module to 0V on the buss board.
> 
> Thanks again people, much appreciated.
> 
> Peace out.
> > __________________________________
> > Do you Yahoo!?
> > Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> > http://sitebuilder.yahoo.com
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com