Akai S1000 / S1100 samplers

Frankie Bernard on this forum just helped me out, thanks Frank!
You will have to flip the scsi cable at one end.
Normally it won't fit this way so it means you will have to cut off the
plastic part above the scsi connector.
Hope this makes sense for anyone in the future!

Thanks again Frank!

--- In akaiS1000S1100Samplers@yahoogroups.com, "boudewijnbos" 
<teresa@...> wrote:
>
> I recently bought an S-1100 and try to install a 1GB Fujitsu SCSI HD 
> inside. When I connect it to the external SCSI connector (with an 
> adapter cable) it is recognized but when I connect it at the internal 
> connector the S1100 freezes at the message "waiting for hard disk..".
> The SCSI ID of the HD is ID5 so that should not be the problem. 
> I tried it both with the hd not terminated and with a scsi terminator 
> plug at the last SCSI plug on the cable.
> 
> I read about SCSI cards sometimes being defective, could this also be 
> the case with only the internal SCSI connector? Cause the external 
> works. Or is the internal more picky about the harddisk being used?
> 
> Thanks a lot for any help!!
> 
> All the best, Boudewijn
>