Akai S1000 / S1100 samplers

I just installed 20Mb (10MW) in my S1100ex.

For me, it didn't recognize all the memory
until it was installed 2-8-8-2.

In other words 8-8-2-2 suggested below won't
work.  That comes up as 4Mb (2MW) (even with 
the jumpers set properly).  Also 2-2-8-8 is 
only seen as 18Mb (9MW).

It's tricky.


--- In akaiS1000S1100Samplers@yahoogroups.com, PeWe <ha-pewe@...> 
wrote:
>
> 
> 9 megawords installed means there are 18meg of RAM = 2 8meg cards 
plus 1 
> 2meg card.
> So, your S-1000 is able to work w/ 8meg cards already,- just has 
the 
> jumpers resoldered.
> 
> Probably you see, the 2 meg card is in the 1st slot and the 2 8meg 
cards 
> are in the 2 following slots.
> If the display reads 9 meg words at power up, all is fine and you 
can 
> add another 8meg board to the last slot.
> 
> If you plan to add another 2 meg board instead of a 8meg one, so 
take 
> care to put the 2nd 2meg board into the 2nd slot und jump w/ the 2 
8meg 
> boards to the 3dr and 4th slot.
> This will work.
> 
> I myself, I recognized, if 2meg boards are inserted into the 1st 
slot, 
> this card is connected to the chassis w/ a resistor or condenser ( 
don´t 
> know exactly) ...
> 
> Definitely, my S-1000 and my S-1100 are running fine w/ 4 8meg 
boards ( 
> 32MB) without this connection.
> 
> So, maybe, anyone possibly can comment on this connection and the 
part ( 
> resistor/condensor) in more detail here,- I´m intersted in this 
secret too.
> 
> PeWe
> 
> 
> Neil weiher schrieb:
> >
> > --- In akaiS1000S1100Samplers@yahoogroups.com 
> > <mailto:akaiS1000S1100Samplers%
40yahoogroups.com>, "hifistereo2001" 
> > <hifistereo2001@>
> > wrote:
> > >
> > > I just bought one with 9megawords installed, but im not sure if 
the
> > > unit is able to read 8mb boards that I just bought. What are 
ways that
> > > I would know that it could address them, and also how would I 
make the
> > > modification to make them able to read?
> > >
> > I hope this will help you to upgrade your memory... I have a Akai 
S1000
> > with 10 Megawords,,, memory And SCSI Card 
> > http://www.firstpr.com.au/rwi/smem/8Meg.html 
> > <http://www.firstpr.com.au/rwi/smem/8Meg.html>
> >
> > good luck Neil Weiher
> >
> >
>