Akai S1000 / S1100 samplers

First of all you need to find out whether the akai or the cdrom is the
problem. easy to find out if you have another scsi cdrom. it happens
that cdrom players get difficulties to read because wormwheel or
magnetics to adjust the lens dont work properly anymore (because of
dust,...)
This is a S1000/S1100 only list - so we never came across this kind of
problems. You can also try other akai fora.
Rgds
Frank



--- In akaiS1000S1100Samplers@yahoogroups.com, "chthonic"
<chthonic@...> wrote:
>
> hi.  i own several akai samplers, though none are s1000 or 1100 i
hope this list is also for 
> other similar s-series models (i have an s900, an s2800, an s3000XL
and a CD3000).
> 
> a few years ago, my friend's CD3000XL stopped recognizing CDs,
whether audio or data.  
> it would just say "NO DISK".  about a year or 2 later, mine
developed the same issue.
> 
> sometimes it seems this is triggered by not waiting for the unit to
be totally ready and/or 
> being a bit too fast with the CD-accessing buttons.  sometimes it
seems like everything 
> was fine, and then the next time it's turned on, it's not working.
> 
> the only thing that seems to temporarily "solve" the issue is
unplugging the unit 
> completely, SCSI, MIDI, and power, and leaving it like that for
about 24 hours.  sometimes 
> that doesn't work however and it takes longer.  sometimes i've even
pulled it off its perch 
> and opened it up, only to find that it would work again, sometimes
not.  it's always 
> eventually come back but it's frustrating being unexpectedly unable
to work.
> 
> any suggestions what might be causing this, how to avoid it, and
most importantly, what 
> to do to make it come back?
> 
> someone on the midicase list suggested a dirty laser lens.  nothing
looked particularly 
> dirty in there, but i just got a can of air and blew it out.  tried
a CD and...still NO DISK.
> 
> any leads would be much appreciated.
> 
> 
> d.
>