Akai S1000 / S1100 samplers

aneurysmhook wrote:

>The info in the link that was given in previous response has all the 
>jumper settings you need.
>  
>
Yes, I know. But most PC drives these days don't have jumpers any longer.
The drive 1/drive 0 (master/slave) issue is no problem -I've done this 
myself, modifying a standard Sony PC drive for use with an Atari ST.
It's usually a zero-Ohm resistor and marked "DS" (drive select) as far 
as I can remember on the circuit board.

Is the "RDY" (ready) signal usually marked on most PC floppy drives so 
they can be modified even if there isn't any jumper available?


Hallvard