Akai S1000 / S1100 samplers group photo

Yahoo Groups archive

Akai S1000 / S1100 samplers

Index last updated: 2026-04-28 23:15 UTC

Message

RE: Help with SCSI CD ROM

2014-02-09 by <xxxdna@...>

Thanks for your replies. You may have missed it but I posted the solution which turned out to be the way the AKAI sample cd was being burned with my burning software. I have been using SCSI sampler devices for years so I am pretty confident I can get through any SCSI problem, which was why this one was a tricky one. I didn't think that the burning rate and block size need to be set to specific values to get the CD to be read by the S1100.

It's working now and I'm happy. Although the S1100 is a little touchy about reading the discs.. If the drive isn't spinning up just right, or you go too fast switching through partitions/banks I get read errors... but I just give it some time and it reads the discs when it's read ;) Figures for something that is 20+ years old at this point!

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.