Akai S1000 / S1100 samplers

If you boot a S-1xxxx series sampler w/ a connected SCSI HD, MOD or Zip 
(w/ inserted media containing the latest OS) already running,- S-1xxx 
sampler loads the latest OS from that media overriding the older OS in ROM.
Same behaviour like it is w/ a floppy disk.
There�s this "waiting for harddisk ready" message you can skip w/ F7.

IF the harddisk or any SCSI media drive is "ready" before power up of 
the S-1xxx sampler, the sampler recognizes the running drive and loads 
highest OS available on that drive.
If you power up S-1xxx series sampler before powering up the drive, it 
doesn�t work.

SCSI IDs must be set up right for correct operation.

It�s a idea to have a floppy drive replaced by a zip or MOD though !


Am 28.07.2011 13:45, schrieb Rish:
> I'm not sure thats the way it works, as far as I know.
>
> Rish
>
> Life is like MIDI, your either IN, OUT or THRU.
>
>