The Cyndustries List

Under further examination the beats and clangorous tones are heard only from
the morph outputs, at morph settings over 1.5 or so.  It is probably some
function of the squaring of the output.  I hear no beating from the sine
wave output, or when morph is less than 1 and sine/trianglish in shape.

Also, just to be clear, I feel the ZO is a great addition to my modular
setup.  I'm quite happy with the purchase and the new sonic territory
enabled with the module.  I guarantee you'll hear sounds you've never heard
before from your modular.

John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com


-----Original Message-----
From: The_Cyndustries_List@yahoogroups.com
[mailto:The_Cyndustries_List@yahoogroups.com] 
Sent: Tuesday, February 28, 2006 8:43 PM


The error (Hertz) difference shows what would be the beat frequency.  This
is what might cause beats and clangorous tones.  Worst case beat frequency
is about 2 Hertz, which shouldn't cause the artifacts with indexed FM that I
described in previous posts.  Mark is working with me offline to understand
other causes for this.