Yahoo Groups archive

SergeModular

Index last updated: 2026-04-28 23:13 UTC

Thread

TKB stuck

TKB stuck

2014-08-19 by Todd Barton

Hello Friends,

OK, my 1979 Serge TBK all of a sudden began to "stick" or "freeze" on pad 16
when I flip the "keys" switch to ON. The pot on 16 will send cv but all the other
pads no not respond. Just before this happened I was doing a lot of patching
using Pressure and KV. Any thoughts and help would be deeply appreciated.

all best wishes,
Todd
_______________________________________________
http://vicmodbarton.bandcamp.com/album/analogie
http://vimeo.com/31758868
http://www.youtube.com/user/vgermuse
http://www.toddbarton.com

Re: TKB stuck

2014-08-19 by Nick Liebrecht

Hi Todd,

Did you try and adjust the sensitivity trim pot inside the unit? That might do the trick.

Regards,
Nick
Show quoted textHide quoted text
On Tue, Aug 19, 2014 at 4:40 AM, Todd Barton vgermuse@... [SergeModular] <SergeModular@yahoogroups.com> wrote:

Hello Friends,

OK, my 1979 Serge TBK all of a sudden began to "stick" or "freeze" on pad 16
when I flip the "keys" switch to ON. The pot on 16 will send cv but all the other
pads no not respond. Just before this happened I was doing a lot of patching
using Pressure and KV. Any thoughts and help would be deeply appreciated.

all best wishes,
Todd


Re: TKB stuck

2014-08-19 by Todd Barton

Thanks much Nick. Yeah I did try both trim pots.
Appreciate your time and response.
Best wishes, Todd

Sent from Yahoo! Mail on Android


Show quoted textHide quoted text
From: Nick Liebrecht nick.liebrecht@... [SergeModular] <SergeModular@yahoogroups.com>;
To: <SergeModular@yahoogroups.com>;
Subject: Re: [SergeModular] TKB stuck
Sent: Tue, Aug 19, 2014 3:22:21 PM

Hi Todd,

Did you try and adjust the sensitivity trim pot inside the unit? That might do the trick.

Regards,
Nick


On Tue, Aug 19, 2014 at 4:40 AM, Todd Barton vgermuse@... [SergeModular] <SergeModular@yahoogroups.com> wrote:

Hello Friends,

OK, my 1979 Serge TBK all of a sudden began to "stick" or "freeze" on pad 16
when I flip the "keys" switch to ON. The pot on 16 will send cv but all the other
pads no not respond. Just before this happened I was doing a lot of patching
using Pressure and KV. Any thoughts and help would be deeply appreciated.

all best wishes,
Todd


Re: TKB stuck

2014-08-22 by Nick Liebrecht

Hi,

Does it work now? If not, you might want to check the wire on the ribbon cable that attaches to pad 16. If it is shorted to the panel, it could get stuck there.

Best,
Nick


On Tue, Aug 19, 2014 at 9:06 AM, Todd Barton vgermuse@... [SergeModular] <SergeModular@yahoogroups.com> wrote:

Thanks much Nick. Yeah I did try both trim pots.
Appreciate your time and response.
Best wishes, Todd

Sent from Yahoo! Mail on Android


Show quoted textHide quoted text
From: Nick Liebrecht nick.liebrecht@... [SergeModular] <SergeModular@yahoogroups.com>;
To: <SergeModular@yahoogroups.com>;
Subject: Re: [SergeModular] TKB stuck
Sent: Tue, Aug 19, 2014 3:22:21 PM

Hi Todd,

Did you try and adjust the sensitivity trim pot inside the unit? That might do the trick.

Regards,
Nick


On Tue, Aug 19, 2014 at 4:40 AM, Todd Barton vgermuse@... [SergeModular] <SergeModular@yahoogroups.com> wrote:

Hello Friends,

OK, my 1979 Serge TBK all of a sudden began to "stick" or "freeze" on pad 16
when I flip the "keys" switch to ON. The pot on 16 will send cv but all the other
pads no not respond. Just before this happened I was doing a lot of patching
using Pressure and KV. Any thoughts and help would be deeply appreciated.

all best wishes,
Todd



Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.