SergeModular

-------------- Original message --------------
From: "Kim G. Hansen" <kimgh@...>

Hello fellow sergers :)

I'm trying to decide which modules i want in a panel.
- I already have two panels:
a custom that i got built back in 96 and a sequencer panel
that i recently bought �sed from Ross Healy ( Hi Ross )

Obviously i want the new panel to fit right in and complement/strength en
what i already have in the best possible way, and i was hoping
for your insight and comments in this matter.

My current modules:

Custom panel:

PNRV-NTO-PCO- RING-VCM- AMX-VCFQ- DTG(with bipolar outs)-UAP

sequencer panel:

SEQ8-ASR(Dual) -ACPR-DTG( with cycle switch)-BLOG- SQP4

For the new panel i know i will want a PCO, RS, RING, DSG and maybe a
QUAN - I know i'll need some CV-processing and
mixing too..

How would you lay it out and fill out the panel ?

all the best, - Kim

--- In SergeModular@yahoogroups.com, darkstr1746@... wrote:
>
> for my taste you seem to be a little short on the CV processing
end. Add a BUFF or a PRC or SPRC. A couple more Oscillators and a
Bandwidth filter wouldn't hurt either. I'm big on spinning things
around and for that you need at least one XFAD ( two is better ) and
a QUO. Of course a DCSM wouldn't hurt either.
> just my two cents.
> kind regards
> john duval
> ( ex captain of the universe ) LOL
>
> -------------- Original message --------------
> From: "Kim G. Hansen" <kimgh@...>
> Hello fellow sergers :)
>
> I'm trying to decide which modules i want in a panel.
> - I already have two panels:
> a custom that i got built back in 96 and a sequencer panel
> that i recently bought úsed from Ross Healy ( Hi Ross )
>
> Obviously i want the new panel to fit right in and
complement/strengthen
> what i already have in the best possible way, and i was hoping
> for your insight and comments in this matter.
>
> My current modules:
>
> Custom panel:
>
> PNRV-NTO-PCO-RING-VCM-AMX-VCFQ-DTG(with bipolar outs)-UAP
>
> sequencer panel:
>
> SEQ8-ASR(Dual)-ACPR-DTG(with cycle switch)-BLOG-SQP4
>
> For the new panel i know i will want a PCO, RS, RING, DSG and maybe
a
> QUAN - I know i'll need some CV-processing and
> mixing too..
>
> How would you lay it out and fill out the panel ?
>
> all the best, - Kim
>

> Captain Duval, -
>
> when you say "spinning around" - do you mean
> panning in the stereo image ?
>
> Apart from music i make my living as an editor in post-production,
> and i'd like to use the Serge for building
> atmospheres and soundscapes that moves in a surround
> mix.
> - Do any of you on the list use serge for things like
> that ?
>
> You're right that i need more cv-mixing/processing
> maybe a panel layout like this:
>
> QUAN-PCO-NCOM-RS-RING-PRC-XFAD-VCFS-DSG
>
> thats 15" leaving one over for what ? -
>
> Of course if anyone has a used panel like this for sale - :)
>
> Kim
>