SergeModular

>----------------------------------------------------------------------------|

| |
| To: SergeModular@yahoogroups.com |
| cc: (bcc: Barry Michael/Contractor/Enron Communications) |
| Subject: Re: [SergeModular] Serge setup |

>----------------------------------------------------------------------------|

John and Scott,
I also use an Encore Expressionist with my Serge. I don't know what kind of
"panel" John is using, but my Expnst has eight CV and eight GATE outs on the
back (1/4" phone jacks) - you use the long 1/4" to banana cables supplied by STS
to patch into the Serge modules. And for Scott, yes there is a limited amount of
editing available in the Exprnst for both Velocity sensitivity and Gate release
time. You just have delve a little bit into the system settings on the Encore.
Hope this helps.
BarryM


John,


Can you get access to the velocity and release velocity data with the Encore
Expressionist?


Thanks, Scott


DarkStr717@... wrote:

In a message dated 5/6/01 3:42:44 PM, Alexmoog@... writes:


<< What kind of interface do I need for these connections ? >>


I'm useing the Encore Expressionist and a panel that has a CV interface
modual on it. Actually there are two moduals. on is for CV and the other is

for gates.
John

Yahoo! Groups Sponsor

(Embedded image moved to file: pic29247.gif)

(Embedded image moved to file: pic15186.gif)




To unsubscribe from this group, send an email to:
SergeModular-unsubscribe@yahoogroups.com

Keep on Patchin'!


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.