Serge system update
2003-01-11 by Ernest Deakyne
Here's an updated offer for the Serge panels I am selling:
Panel 1 - 1999 - Sound Transform Systems
Sequencer (8)
TKB Quantizer
Dual Analog Shift Register
Pulse Divider
Triple Waveshaper
Frequency Shifter
Control Module
Dual Envelope Detector
Dual VCA
Panel 2 - 1982-83 Series - *Refurbished by STS in 1998
Dual Slope Generator (w/switch mod to enable auto triggering/cycling)
Scaling Buffers
Active Processor x 2
Scaling Processor
Dual Transient Generator x 4 (w/switch mod to enable auto
triggering/cycling)
I will include 28 patch cords of various lengths
I can not include a **PSU. (I can include a power distribution unit,
one of the connectors has broken off but the remaining five are fine.)
I'm now asking $2500 for both panels including shipping. I am not
selling the panels separately.
A few people had trouble using the website I put up, so if you would
like to see pictures, just e-mail me and I'll send some jpg's.
*All circuits were tested, any faulty parts replaced, the inside and
outside were cleaned and the panel did a 24 hour burn in. Finally it
received a new home in a 1/2 deep case w/rack wings. It has operated
flawlessly since. The front panel is not in mint condition and the
pictures can show this better.
**I'm keeping my PS-6 to power my remaining three panels. As such, any
buyer will need to arrange their own power source, or draw power from
an existing PSU. Each panel has 1 power connector. The DTG panel
connector is about .5 meters long and the new panel has a 1m connector.
Thanks!
Ernest Deakyne
Panel 1 - 1999 - Sound Transform Systems
Sequencer (8)
TKB Quantizer
Dual Analog Shift Register
Pulse Divider
Triple Waveshaper
Frequency Shifter
Control Module
Dual Envelope Detector
Dual VCA
Panel 2 - 1982-83 Series - *Refurbished by STS in 1998
Dual Slope Generator (w/switch mod to enable auto triggering/cycling)
Scaling Buffers
Active Processor x 2
Scaling Processor
Dual Transient Generator x 4 (w/switch mod to enable auto
triggering/cycling)
I will include 28 patch cords of various lengths
I can not include a **PSU. (I can include a power distribution unit,
one of the connectors has broken off but the remaining five are fine.)
I'm now asking $2500 for both panels including shipping. I am not
selling the panels separately.
A few people had trouble using the website I put up, so if you would
like to see pictures, just e-mail me and I'll send some jpg's.
*All circuits were tested, any faulty parts replaced, the inside and
outside were cleaned and the panel did a 24 hour burn in. Finally it
received a new home in a 1/2 deep case w/rack wings. It has operated
flawlessly since. The front panel is not in mint condition and the
pictures can show this better.
**I'm keeping my PS-6 to power my remaining three panels. As such, any
buyer will need to arrange their own power source, or draw power from
an existing PSU. Each panel has 1 power connector. The DTG panel
connector is about .5 meters long and the new panel has a 1m connector.
Thanks!
Ernest Deakyne