Hi Yulian,
You've anticipated my next question!
Jason
You've anticipated my next question!
Jason
--- In SergeModular@yahoogroups.com, BooleanYulian <a.b@...> wrote:
>
> Hi Jason..
>
> and for the TKB: connect the KV (which produces a voltage corresponding to each pad and, unless i'm mistaken, in whole tone increments, starting at 0V at pad#1) to the CV In of your sound source and KP (which goes HIGH when a pad is touched) to the Gate In or Trig In of your VCA envelope (depending on how you want the envelope to behave).. you can also patch PRESSURE (which sends out a voltage proportional to the surface of your finger touching the pad) somewhere for additional expression.. then play the touch pads. Of course you can also run KV through a scaler or a quantizer.
>
> hope this helps
>
> Yulian
>
> On 2010-06-11, at 10:53 PM, dr.jasoncrest wrote:
>
> > I'd really like to be able to play the TKB by hand so that the note(s) played has a typical envelope shape and the end result is silence. I've been struggling to figure out how to do this and I was hoping that someone could shine some light on this.
> >
> > A second and related concern is my inability to create an envelope that results in silence. I'm trying to do this by applying the envelope to the AM on the UAP/Xfader and when the envelope is through I can still hear the note droning on and not the silence I was hoping for.
> >
> > Thanks again for all the help.
> > Jason
> >
> >
>