you can get Metalbox or Modcan banana<->1/4" adapters.. a custom one is quite simple to make... the tips goes to the banana and the sleeve to the SERGE PSU ground.. just connect all the 1/4" grounds together and then to a banana terminal that can be plugged to your SERGE's PSU ground terminal
just as long as the gate level is between +5 & +10 volts.. I've used MIDI2CV converter to drive my panels, some times the 606 trig out, or MOTU VOLTA, or the FLAME clock converter... its all pretty standard on the SERGE side.. (i think:)
... you can also run your analog clock through a TimeGen Clock, a DSG or a DTG to change it; changing the duty cycle or slewing the clock can yield interesting grooves
my SAM and SERGE get along quite well btw
Y.
On 30-Aug-09, at 5:03 AM, skkatter wrote:
Hi,
I'm currently contemplating my first Serge purchase but was wondering
how you all sync your Serge equipment to non-banana 1/4" (or even
1/8") jacks for CV/Gate?
How easy would it be to control, say a Creature panel with something
like the SND Sam-16?
Thanks,
Stephen
--
http://www.skkatter .net