SergeModular

> Oh, what a great question!

What a great and detailled answer - Thank you !

JH.

> In "AD" mode (just triggered) the peak is ~ 5.5 v. And it varies a little
> from module to module.
> If you apply both a signal in and a trigger, strange things happen:
> 1. if the bias signal in is 0-5.5 v, the output voltage will rise to the
> module's normal peak.
> 2. if it's > 5.5 v, no change is observed
> 3. if it's < 0 v but > ~ -3.5 v, the voltage rises from the negative bias

to

> 5.5 v
> 4. if it's < ~ -3.5 v, it stays on till the bias voltage goes over -3.5v.

In

> other words, no release.
>
> Amazing, there seems to be no end of interest in these things.