>Ken, maybe I am confused...but are you/we talking about the PSU orPSU. Other conversations I have had considered the PSU. The PSD is not a
>PSD?
problem. I am obviosuly confusing myself.
>You can mount the PSD (and that´s the only thing that should beThe screw holes for mounting the panels to the boards are closer together
>mounted inside a case) even in a 2,5 inch deep transit style case
>that houses a TKB (I just checked that). The TKB is probably the
>best choice as there is very little circuitry in the left half of
>it. Plenty of space for mounting the PSD.
>Regarding the "screw holes are closer together than the width of the
>circuitry" I simply do not understand...possibly because I am not a
>native english speaker...
than the width of the circuitry on the back of the panel, due to the
mounting rails and wire ties sticking out just a little bit too much. Serge
boards have trimmed away some of the mounting lip of the boats, to make it
easier to mount the panel to the boat, other wise it is very hard to get the
circuitry to go in the boat because it hits the lips.
Ken
_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>