Sebastian Kuehnl wrote:
been lugged around several dozen times to gigs, jam sessions, etc. Since all the
other parts are fine I just assumed that some marginal pots surfaced in a mfr's
batch. Matt, you also had to replace a VCF pot, right? At first I thought it was
dirty but it's gotten worse - I think there's a hairline crack in the resistive
element.
One other thing that's come up, a couple years ago a VCA opamp died. Was not too
hard or expensive to replace. I was able to recalibrate the VCA by ear..... cv
rejection, gain, and audio bleed-thru @ 0 cv...
Anybody else have Serge stuff go poof?
- John P.
> Hi John,That's a good question. My system has seen pretty frequent studio use, plus it's
> > That is not the case now, Rex sweats every little detail.
>
> I'll frankly ask then why you are replacing pots on four year old panels?
been lugged around several dozen times to gigs, jam sessions, etc. Since all the
other parts are fine I just assumed that some marginal pots surfaced in a mfr's
batch. Matt, you also had to replace a VCF pot, right? At first I thought it was
dirty but it's gotten worse - I think there's a hairline crack in the resistive
element.
One other thing that's come up, a couple years ago a VCA opamp died. Was not too
hard or expensive to replace. I was able to recalibrate the VCA by ear..... cv
rejection, gain, and audio bleed-thru @ 0 cv...
Anybody else have Serge stuff go poof?
- John P.