--- In SergeModular@yahoogroups.com, "paradigmshiftbeats" <paradigmshiftbeats@...>
wrote:
from one input to the other, whereas I want to do "hard switches", among other things.
Does anyone have an XFAD they could try this with? I wonder if that behaves the same as
the UAP.
jump between the two input signals.
terrible at this sort of thing.
Thanks!
Thomas
wrote:
>I'm not sure what it is, Rex also spoke to me about the different curves, but I hear a fading
> --- In SergeModular@yahoogroups.com, "riluttante" <riluttante@>
> wrote:
> > So you're saying they both have a slight lag to them, an audible
> > "fade" between the two input signals no matter how steep the slope
> > of the CV is?
>
> I think what you're experiencing in the UAP is its equal-power
> curve, not a lag on the voltage per se. I frequently use my ACPR
from one input to the other, whereas I want to do "hard switches", among other things.
Does anyone have an XFAD they could try this with? I wonder if that behaves the same as
the UAP.
> with audio and don't have any complaints. You lose a built-in VCA,No, I've been using gates from a DSG and the TKB, so that should make a very sudden
> but if you simply want to fade waveforms/filter outputs, vary the
> depth/source of feedback loops, etc, then it works quite well. I
> know I've done "hard switching" between two ACPR inputs using the
> Sequencer in the past. I'll try again tonight using a DSG if I can
> find the time and report back.
>
> What CV sources have you been using to attempt this with your UAP;
> perhaps the waveform you're putting in is not completely square?
jump between the two input signals.
>Can't help you here. Rex spontaneously started to explain this over the phone, but I'm
> Also, as I said initially the equal-power curve may be affecting
> your ear's perception of the fade of two audio signals. I had a
> conversation with Rex once in which I commented that I generally
> prefer the "linear" fade of the ACPR to the UAP. In the wonderful
> manner that Rex does, he spent the next five minutes explaining in
> detail why the ACPR fade is in fact NOT linear. My recollection is
> that the layman's version of Serge fading is something like this:
>
> linear fade = x
> ACPR = x^2
> UAP = x^3
>
> Maybe someone with actual technical expertise can better elaborate.
> In any case, you may find the effect you're seeking is more easily
> achieved using the ACPR's "x-squared" approach.
terrible at this sort of thing.
Thanks!
Thomas
>
> Hope this helps!
> Chris
>