Sorry - yes I know they must be clocked externally - so, to clarify -
External 5 volt pulse clock sent to Serge 4/5 Step SEQs [Clock Input]
- the SEQs do not provide seq/clocked voltage changes at the Row
Outputs on the front panel - however - a multimeter across the Main
Counter Chip IC output pins shows CV/Clock activity as expected -
hence my deduction that bewteen IC and front panel - a simple
component may be at fault. Regards - David.
External 5 volt pulse clock sent to Serge 4/5 Step SEQs [Clock Input]
- the SEQs do not provide seq/clocked voltage changes at the Row
Outputs on the front panel - however - a multimeter across the Main
Counter Chip IC output pins shows CV/Clock activity as expected -
hence my deduction that bewteen IC and front panel - a simple
component may be at fault. Regards - David.
--- In SergeModular@yahoogroups.com, John P <johnp299792@...> wrote:
>
> The Serge sequencers don't have internal clocks. You have to clock
them
> from an external source.
>
> the 2 Smaller sequencers do not run - I have tested the
> internal pins to the best of my ability - the Decade/Clock chips
> generate clocks and CVs but these do not appear at the front panel
> banana jacks
>
> --
> m/n/m/l
> surreal electronic music, sound, noise
> http://www.mnmlnoise.com
>