Is the faceplate of the panel with the UAP grounded?
Is there a wire connected to ground on any of the PCBs run to an eyelet that
fits behind on of the four standoffs that hold the panels in place on the
faceplate end?
jan-hinnerk.helms@... wrote:
Is there a wire connected to ground on any of the PCBs run to an eyelet that
fits behind on of the four standoffs that hold the panels in place on the
faceplate end?
jan-hinnerk.helms@... wrote:
> Dear Smog,
>
> done further patches with my [TKB] and Animal and having loads of great
> fun with this enormously compact system. But this one thing puzzled me.
>
> - Set the [UAP] to DualVCA
> - [NTO] sine in [UAP] input 1
> - [PCO] sine in [UAP] input 2
> - [UAP] Pan/Fade to leftmost position
> - [UAP] Gain to leftmost position
> - 1/4" cables going from [UAP] output 1 and 2 to mixer
>
> Result:
> - [NTO] and [PCO] bleed thru to [UAP] output 1
>
> Can anybody (un)confirm this?
>
> On top of that, even with nothing patched but just the 1/4" cables
> going from the [UAP] outs to mixer , I can still hear the [NTO] and
> [PCO] bleeding thru to both outputs. If I patch the DTG's to oscillate
> in the audio range, I can them going, too. John P., does this look like
> the grounding issue you described on Egres/Wizardry intro?
>
> Thanks in advance,
> best regards,
> Jan-Hinnerk
>
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>