Hi.
I'd like to know if you ever had a problem with crosstalk, EMI or
RFI or any kind of interference or problem when using the
non-shielded cables for patching the Serge.
I'm talking about, say, 12 panels (three frames w/3 panels each)
heavily patched.
I imagine you normally use a max length of about 1 meter (3
feet?)
It would be OK to use a 1,5 meters cable (when interpatching
frames) or for that length you would use a shielded cable (that
breaks in to two connectors on each side, signal and panel
ground)
I'd appreciate any info/help/experience.
Thank you very much in advance,
Fernando
I'd like to know if you ever had a problem with crosstalk, EMI or
RFI or any kind of interference or problem when using the
non-shielded cables for patching the Serge.
I'm talking about, say, 12 panels (three frames w/3 panels each)
heavily patched.
I imagine you normally use a max length of about 1 meter (3
feet?)
It would be OK to use a 1,5 meters cable (when interpatching
frames) or for that length you would use a shielded cable (that
breaks in to two connectors on each side, signal and panel
ground)
I'd appreciate any info/help/experience.
Thank you very much in advance,
Fernando