SergeModular

The ARs and S/H on my Buchla 212 module fire at around 2.2V of
positive-going voltage. Note that the ARs and the S/H will output 15V.

Easier,

-Mike

--- In SergeModular@yahoogroups.com, John Papiewski <johnp299792@a...>
wrote:

> I'll throw you a lifesaver...
> Guessing here, you're trying to interface the Buchla with the Serge.
> I haven't done this myself but there are probably just two issues:
> grounding and triggers with the rising edge.
>
> Are you sure the two synths have a common ground? If they don't the
> triggers, cv, or audio won't make it back and forth.
>
> The Serge needs a 'rising edge' trigger, meaning that it senses the
> rising side of the pulse and that must be fast and around +5v or better.
> A rectangular pulse should be fine. This is normally not an issue

but I

> don't know Buchla triggering well enough to know offhand.
>
> Anybody else?
>
> JWelsh3374@a... wrote:
> > I feel like an idiot...I can work a Buchla but cannot seem to

understand the

> > Serge gates and triggers. I am thinking of trading a piece of gear

for a

> > Serge Animal shop panel. The guy was nice enough to let me try it

awhile and

> > I cannot seem to grasp the language of the Serge.
> >
> > I am trying to use the Buchla 140 pulse gen/146 sequencer to

trigger it and

> > am confused. Hell...I can't even describe the problem! Lol...
> >
> > Are there any Serge language differences that I need to be aware

of? I am

> > beffled...
> > Guido
> >