I'll throw you a lifesaver...
Guessing here, you're trying to interface the Buchla with the Serge.
I haven't done this myself but there are probably just two issues:
grounding and triggers with the rising edge.
Are you sure the two synths have a common ground? If they don't the
triggers, cv, or audio won't make it back and forth.
The Serge needs a 'rising edge' trigger, meaning that it senses the
rising side of the pulse and that must be fast and around +5v or better.
A rectangular pulse should be fine. This is normally not an issue but I
don't know Buchla triggering well enough to know offhand.
Anybody else?
JWelsh3374@... wrote:
Guessing here, you're trying to interface the Buchla with the Serge.
I haven't done this myself but there are probably just two issues:
grounding and triggers with the rising edge.
Are you sure the two synths have a common ground? If they don't the
triggers, cv, or audio won't make it back and forth.
The Serge needs a 'rising edge' trigger, meaning that it senses the
rising side of the pulse and that must be fast and around +5v or better.
A rectangular pulse should be fine. This is normally not an issue but I
don't know Buchla triggering well enough to know offhand.
Anybody else?
JWelsh3374@... wrote:
> I feel like an idiot...I can work a Buchla but cannot seem to understand the
> Serge gates and triggers. I am thinking of trading a piece of gear for a
> Serge Animal shop panel. The guy was nice enough to let me try it awhile and
> I cannot seem to grasp the language of the Serge.
>
> I am trying to use the Buchla 140 pulse gen/146 sequencer to trigger it and
> am confused. Hell...I can't even describe the problem! Lol...
>
> Are there any Serge language differences that I need to be aware of? I am
> beffled...
> Guido
>