In a message dated 4/13/02 10:40:15 AM, mbw@... writes:
<< then simply plug an
expressionist output into any input on your mixer to establish proper
ground. try this and let me know if you are then getting the correct
1v/oct voltages. >>
Wouldn't plugging any Expressionist output into a Serge CV interface do the
same thing??... if not that might explain some of the tuning problems I've
been having lately useing my MAQ through the expressionist to a STS CV
interface. The MAQ is grounded to a Serge power supply and of course all that
is grounded to my mixer but the Expressionist is not...... hmmmmm....
comments???
KInd regards
John DuVal
<< then simply plug an
expressionist output into any input on your mixer to establish proper
ground. try this and let me know if you are then getting the correct
1v/oct voltages. >>
Wouldn't plugging any Expressionist output into a Serge CV interface do the
same thing??... if not that might explain some of the tuning problems I've
been having lately useing my MAQ through the expressionist to a STS CV
interface. The MAQ is grounded to a Serge power supply and of course all that
is grounded to my mixer but the Expressionist is not...... hmmmmm....
comments???
KInd regards
John DuVal