All about the Roland Jupiter-series

Thanxx alot mate,I think I go for the adaptor option for my memory.Thanks 
for the great help!!!



http://stage.vitaminic.co.uk/tim_wellens
Tim Wellens(Dj Strike!),Belgium.






>From: Dana Fiorucci <dfiorucci@...>
>Reply-To: Roland_Jupiters@yahoogroups.com
>To: Roland_Jupiters@yahoogroups.com
>Subject: Re: [Roland_Jupiters] Digest Number 394
>Date: Sun, 15 May 2005 14:16:35 -0500
>
>The small switch determines which side of the split MIDI will be sent to if 
>you have it in split mode.
>Up position MIDI will play the upper part.
>Down position MIDI will play the lower part.
>
>About the memory one thing you could look at doing if you don't move your 
>Jupiter around would be to install a wallwart transformer that would supply 
>the proper voltage instead of the battery.
>Keeping your Jupiter 8 on 24/7 really would not be an option since the heat 
>generated by it would surely lessen the life span of all the other 
>components.
>
>You could also save your patches to a DAW instead of a tape.
>This makes a great way to backup your patches as a wav file.
>
>You might also want to get a second opinion about wether the memory block 
>can be repaired.
>
>HTH,
>Dana
>On May 14, 2005, at 6:40 AM, Roland_Jupiters@yahoogroups.com wrote:
>
>>Hello,while moving my studio (and my beloved jupiter8) to a new
>>location a discovered a switch next to my DCB-port (small DCB) of my
>>Jupiter..What's the use for it?? The manual doesn't mention it...
>>
>>I also have another question : I have no memory in my Jup8...The guys
>>at Roland Belgium have replaced the battery and it worked for half a
>>year but then...memory gone again...They say it's not repairable as
>>the memory-block is damaged and drains too much power from the
>>battery....Can anyone help? I have to load my patches by tape each
>>time,very time consuming...
>-Visit Dana's Synth Site
>http://members.cox.net/synths

_________________________________________________________________