-----Original Message-----
From: lucid [mailto:digitallucid@...]
Sent: Friday, October 26, 2001 12:30 AM
To: Mike Kent; Analogue Heaven AH
Subject: Re: [AH] Jupiters
the main LFO's sine wave to the corresponding sliders in the performance
section.. or am i missing something else.
the jp6 has 2 seperate LFOs then. i cant remember if you can assign that jp6
performance LFO to one VCO instead of both.
my big white button seems to fall out of tune if you press too hard.. if its
controlling VCOs and you move your finger around on it the pitch will waver.
is this standard or is this another problem on my fix it list?
thanks
lucid
From: lucid [mailto:digitallucid@...]
Sent: Friday, October 26, 2001 12:30 AM
To: Mike Kent; Analogue Heaven AH
Subject: Re: [AH] Jupiters
> The rate control is the LFO slider on the front panel (2nd slider from thewhoa. i missed that... so the big white button is just a switch to turn on
> left hand side).
the main LFO's sine wave to the corresponding sliders in the performance
section.. or am i missing something else.
the jp6 has 2 seperate LFOs then. i cant remember if you can assign that jp6
performance LFO to one VCO instead of both.
my big white button seems to fall out of tune if you press too hard.. if its
controlling VCOs and you move your finger around on it the pitch will waver.
is this standard or is this another problem on my fix it list?
thanks
lucid