-----Original Message-----
From: media@... [mailto:media@...]
Sent: Wednesday, March 07, 2001 8:40 PM
To: Shawn Cleary
Cc: analogue@...
Subject: Re: [AH] Midi on MKS-80
At 7:35 AM -0500 03/07/01, Shawn Cleary wrote:
have an MPG-80, and this issue is not addressed in the service notes. I
would get software like Kurzweil's MIDIScope and look at it.
From: media@... [mailto:media@...]
Sent: Wednesday, March 07, 2001 8:40 PM
To: Shawn Cleary
Cc: analogue@...
Subject: Re: [AH] Midi on MKS-80
At 7:35 AM -0500 03/07/01, Shawn Cleary wrote:
>hi,Yes, I'm sure quite a few people could, as it's the only way to play one :)
>
>Can someone tell me about the midi on the MKS-80?
>I realize its probably limited because of the age but sonicstate.com saysThey are correct. It can receive velocity and channel aftertouch.
>>it receives velocity and pressure sensitivity.
>Do the knobs on the MPG-80 send midi sysex like the Juno 106?That's a good question. I believe they send very similar data. I don't
have an MPG-80, and this issue is not addressed in the service notes. I
would get software like Kurzweil's MIDIScope and look at it.
>Is there a way to control the cutoff (standard midi cc #74 I believe), orYes, you can assign the LPF cutoff frequency to aftertouch.
>>in other words, have the cutoff receive when controlled via an external
>>keyboard or sequencer. Please email me the midi info details.