-----Original Message-----
From: Jason 'Fish' Proctor [mailto:jproctor@...]
Sent: Wednesday, January 10, 2001 7:09 PM
To: media@...; Analogue Heaven
Subject: Re: [AH] MKS-80 w/PC-1600x ??
Sounds like the 1600 is pushing stuff out too quick for the MKS to
deal with it. If the 1600 has a delay parameter, try tweaking that.
From: Jason 'Fish' Proctor [mailto:jproctor@...]
Sent: Wednesday, January 10, 2001 7:09 PM
To: media@...; Analogue Heaven
Subject: Re: [AH] MKS-80 w/PC-1600x ??
Sounds like the 1600 is pushing stuff out too quick for the MKS to
deal with it. If the 1600 has a delay parameter, try tweaking that.
>I'm using a PC-1600x to program an MKS-80. I noticed that when I move the
>faders all the way up, or all the way down, the parameter displayed on the
>PC-1600x goes all the way up or down, but the parameter on the MKS-80 does
>not. If I repeatively move the fader up a bit then all the way back down,
>I get an assortment of small values on the MKS-80, eg. 1, 3, 4, 7, 2, 3 . .
>. but not zero. In the same way, if I keep moving it up, I get an
>assortment of high numbers, but never 100. Any ideas??