-----Original Message-----
From: Cary Roberts [mailto:cary.roberts@...]
Sent: Monday, December 11, 2000 5:49 AM
To: Doug; Analogue Heaven
Subject: Re: [AH] Jupiter 6 and MIDI
One is fully populated and the other is half populated. Hence
the 2+4 and 4+2 split options. You may be able to directly tap
off of these, or it might require an opamp as a current to voltage
converter. I haven't really looked at the schematics so I'd have
to crack open my JP6 to give you a definitive answer. And if
you didn't want to drill holes in the rear of the JP6, you could
rewire the XLR as a lower/upper out.
-Cary
From: Cary Roberts [mailto:cary.roberts@...]
Sent: Monday, December 11, 2000 5:49 AM
To: Doug; Analogue Heaven
Subject: Re: [AH] Jupiter 6 and MIDI
>(Yes! it's bi-timbral.. now ifThis wouldn't be too hard. The JP6 uses two MKS80rev4 voice boards.
>only those europa boys would make a hack that allows each channel it's own
>output)
One is fully populated and the other is half populated. Hence
the 2+4 and 4+2 split options. You may be able to directly tap
off of these, or it might require an opamp as a current to voltage
converter. I haven't really looked at the schematics so I'd have
to crack open my JP6 to give you a definitive answer. And if
you didn't want to drill holes in the rear of the JP6, you could
rewire the XLR as a lower/upper out.
-Cary