All about the Roland Jupiter-series

-----Original Message-----
From: Doug [mailto:umstechi@...] 
Sent: Monday, December 11, 2000 1:10 AM
To: bunchasynthguys
Subject: Re: [AH] Jupiter 6 and MIDI


> "Bradford Allen" <bradforda@...> wrote:
> 
> >I have a Jupiter-6 that I want to use in my MIDI setup but I'm
> >a little confused as to how to assign it's MIDI receive channel.
> >It seems to always recieve in omni mode.

If you plug the midi out to the midi in of the JP-6 and turn it on this
disables omni mode, with the lower half of the split receiving channel 2
and the upper half recieving channel 1. (Yes! it's bi-timbral..  now if
only those europa boys would make a hack that allows each channel it's own
output)

Oh, you cannot change the receive channel numbers, as far as I know,
unless you have something like one of those Anatek pocketfilter boxes.

Hope this helps, 

Doug