-----Original Message-----
From: Tom Moravansky [mailto:tmoravan@...]
Sent: Saturday, April 22, 2000 11:11 PM
To: filtersweep@...
Cc: analogue@...
Subject: Re: [AH] Roland DCB cable
find the 14-pin Centronics cable headers, I'd build DCB cables
for folks, but I can't even locate these.
A different solution may be to replace the 14-pin DCB with a
standard 15-pin D sub connector and just wire up the 14
pins. It would be a custom job for your individual pieces of
gear, but at least it would work.
--
___________________________________________________________
Tom Moravansky tmoravan@...
From: Tom Moravansky [mailto:tmoravan@...]
Sent: Saturday, April 22, 2000 11:11 PM
To: filtersweep@...
Cc: analogue@...
Subject: Re: [AH] Roland DCB cable
>I've been working with someone else on this problem. If I could
> Appreciate any recommendations on a good place to get a cable to use with
> Roland DCB.
> Thanks
>
find the 14-pin Centronics cable headers, I'd build DCB cables
for folks, but I can't even locate these.
A different solution may be to replace the 14-pin DCB with a
standard 15-pin D sub connector and just wire up the 14
pins. It would be a custom job for your individual pieces of
gear, but at least it would work.
--
___________________________________________________________
Tom Moravansky tmoravan@...