QTR-Quadtone RIP

thanks for the responses. I am using Mac OS 10.4.11 and still using PSD CS2 on this mac that runs the E 7600. I have printed the ink separation before using the other Peizo inks without any problem. Do you think that CS2 is not compatible with QTR 2.6.2?
thanks,
Joe

--- In QuadtoneRIP@yahoogroups.com, Mike Finley <mike@...> wrote:
>
> In that case its worth finding out what is wrong. If you're using a 
> Windows PC, you will need a patch to 2.7 for a problem which does affect 
> printing the calibration page. The patch is (or was) at 
> http://www.quadtonerip.com/QTR2.7.0patch.zip
> 
> I can't remember what the patch requirements are for Mac, but if you say 
> what versions of PS and Mac OS you are using somebody can probably 
> advise you about problems and workarounds (I don't use a Mac so I'm 
> spared the colour management problems recent versions have caused)
> 
> I don't know if it'll also fix the 8 ink lines problem - i've only ever 
> used QTR with 4 and 8 ink printers.
> 
> On 28/04/2011 18:26, fjulsing wrote:
> > I was planning on using EB6 from MIS. The inkset is on its way. This is
> > just an exercise to see how QTR works, although I wonder what went
> > wrong. I would think that the page would come out looking like it shows
> > in the User Guide. I'll just wait till the inks arrive.
> > Thanks anyway.
> >
> > Frank
> >
>