QTR-Quadtone RIP

John,
Its not file specific:
as I said in another answer, the same file printed fine from QTR on
Linux in b9 days and failed on the first PC version, as did all sorts
of tests on various width fine lines in shades of dark grey to black,
so if you don't see it on simple tests with fine lines on an R200,
then that printer doesn't have the problem.

Roy,
I've checked the alignment and its fine. 

thanks for the responses,
mike


On Fri, 9 Sep 2005 17:16:30 -0400, "John Moody" <moodymz3@...>
wrote:

>Mike,
>Please provide a link to a file that does not print properly so that we can
>try to help.
>Other than printer (not QTR) issues with the leading and trailing edges of
>the paper, I have no problem printing 1/360” and 2/360” wide vertical lines
>on a R200 printer.
>
>Best regards,
>John Moody
>
>-----Original Message-----
>From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com]On
>Behalf Of Roy Harrington
>Sent: Thursday, September 01, 2005 8:14 PM
>To: QuadtoneRIP@yahoogroups.com
>Subject: [QuadtoneRIP] Re: QTR and Epson 1160 problem still present
>
>--- In QuadtoneRIP@yahoogroups.com, Mike Finley <ekng532@f...> wrote:
>> I gave up using QTR some time ago because of what is for me a major
>> problem:
>> QTR (PC version) cannot print very fine straight black vertical lines
>> (ie along the length of the paper). It produces lines of uneven
>> thickness, and from the dot pattern appears to be printing at a slight
>> angle. This was reported and briefly discussed at the time.
>>
>> I decided I'd give the latest version a try - sadly the problem
>> persists.
>>
>> The problem was introduced with the first PC version (not present in
>> the early Linux versions) and is not seen with other applications I
>> use to print (Qimage, Photoshop) though I haven't installed and tried
>> GIMP
>>
>> mike
>> Mike Finley, http://www.efikim.co.uk
>
>I'm not aware of any problems.  Could it be your printer being misaligned?
>Unidirection printing (HiSpeed = Better) usually helps alignment issues.
>
>Roy
>
Mike Finley, http://www.efikim.co.uk