QTR-Quadtone RIP

I do not know if this workflow can help you or not. This method works with our Gamma 2.2 concentric workflow for PiezographyK7 QTR process with >=CS4. It matches the CS3 output.

You can check this for more details:

http://www.piezography.com/PiezoPress/blog/calibration/printing-images-from-photoshop-cs4/

regards,

Jon Cone
Piezography


--- In QuadtoneRIP@yahoogroups.com, "hhchapman4104" <hchapman@...> wrote:
>
> Printing with linearized QTR profiles in CS3 works fine for me. When I print the same file in CS5 the dark values are off. I am consistent in my color management (all gray gamma 2.2) and print set up.
> See this example using the supplied QTR  Ilford Smooth Pearl profile printing a 21 step wedge and reading LAB L with an Eye-One spectrophotometer. The red line is the print from Photoshop CS3, the blue line from CS5:
> http://img40.imageshack.us/f/cs3vscs5.jpg/
> Here is the Photoshop print dialog from CS5:
> http://img821.imageshack.us/i/cs5printdailog.jpg/
> 
> I'd heard rumblings in the past about possible issues with printing in CS5 but my poor searching skills didn't turn anything up on this in this forum.
> 
> I can continue to print in CS3 but was wondering if there was a fix to enable using CS5?
> 
> Thank you!
>