Yahoo Groups archive

QTR-Quadtone RIP

Index last updated: 2026-04-28 23:12 UTC

Message

Re: [QuadtoneRIP] Epson 3880 - Unable to set printer resolution

2010-05-11 by Roy Harrington

Redo your printer preset -- old ones
often have a resolution entry that
gives the error.

Roy

On Tuesday, May 11, 2010, dbspeer2 <doug@...> wrote:
>
> John,
>
> I was able to print to ABW with out any problem. I even restarted the computer and tried again but that didn't help, I still got the same message.
>
> It's very puzzling, especially since I was able to print one picture through QTR, but nothing since then.
>
> Doug
>
>
> --- In QuadtoneRIP@yahoogroups.com, John Beeching <johnbeeching@...> wrote:
>>
>> Dear Doug,
>>
>> I have to think that your problem is specific rather than generic.  I have
>> recently bought a 3880 after many years with a 2100 and QTR.  Everything
>> installed smoothly and it worked perfectly from the first print.  It also
>> prints fine using ABW, but because I am not familiar with that route I am
>> sticking with QTR.  Have you tried ABW to see if there is a more general
>> problem.  I use a PC with XP.
>>
>> Yours,
>>
>> John
>>
>> On 10 May 2010 23:24, dbspeer2 <doug@...> wrote:
>>
>> > I just purchased the 3880 and I immediately downloaded the Quadtone RIP for
>> > it (I've been using it since my 1270 and yes, I paid!).
>> >
>> > Installation went smoothly but I've only been able to make one print. The
>> > first try gave me the above error message. I tried again and got a print but
>> > it was printed with Pk instead of Mk.
>> >
>> > I then have tried multiple times and every time I get the message, "Unable
>> > to set printer resolution".
>> >
>> > Any thoughts? suggestions? The error log is below.
>> >
>> > thanks,
>> > Doug
>> >
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Adding start banner page "none".
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Queued on "Quad3880" by "douglass".
>> > D [10/May/2010:18:14:26 -0400] [Job 44] File of type application/pdf queued
>> > by "douglass".
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Setting job-hold-until to no-hold
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Adding end banner page "none".
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Job released by user.
>> > D [10/May/2010:18:14:26 -0400] [Job 44] job-sheets=none,none
>> > D [10/May/2010:18:14:26 -0400] [Job 44] argv[0]="Quad3880"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] argv[1]="44"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] argv[2]="douglass"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] argv[3]="PM_W9F8397-2.tif"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] argv[4]="1"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > argv[5]="AP_ColorMatchingMode=AP_ApplicationColorMatching AP_D_InputSlot=
>> > nocollate ColorModel=QTRIP
>> > com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf
>> > com.apple.print.JobInfo.PMApplicationName=Adobe\ Photoshop\ CS3
>> > com.apple.print.JobInfo.PMJobName=PM_W9F8397-2.tif
>> > com.apple.print.JobInfo.PMJobOwner=Douglas\ Speer
>> > com.apple.print.PageToPaperMappingMediaName=Letter
>> > com.apple.print.PageToPaperMappingType..n.=1
>> > com.apple.print.PrinterInfo.PMColorDeviceID..n.=2373
>> > com.apple.print.PrintSettings.PMColorSpaceModel..n.=0
>> > com.apple.print.PrintSettings.PMColorSyncProfileID..n.=836
>> > com.apple.print.PrintSettings.PMCopies..n.=1
>> > com.apple.print.PrintSettings.PMCopyCollate..b.
>> > com.apple.print.PrintSettings.PMDestinationType..n.=1
>> > com.apple.print.PrintSettings.PMFirstPage..n.=1
>> > com.apple.print.PrintSettings.PMLastPage..n.=2147483647
>> > com.apple.print.PrintSettings.PMPageRange..a.0..n.=1
>> > com.apple.print.PrintSettings.PMPageRange..a.1..n.=2147483647
>> > DestinationPrinterID=Quad3880 media=Letter PaperInfoIsSuggested..b.
>> > pserrorhandler-requested=standard ripBlend1H=75 ripBlend1M=75 ripBlend1S=75
>> > ripBlend2H=25 ripBlend2M=25 ripBlend2S=25 ripBlend3H=0 ripBlend3M=0
>> > ripBlend3S=0 ripCalLimit=100 ripCurve1=UCmk-EEnhMatte-neut
>> > ripCurve2=UCmk-EEnhMatte-warm ripCurve3=- ripGamma=0 ripLimit=0
>> > stpDither=Ordered job-uuid=urn:uuid:b8db53bb-c782-3186-69e5-52a537b47e3d
>> > job-originating-host-name=localhost job-impressions=1
>> > com.apple.print.PrintSettings.PMTotalSidesImaged..n.=1
>> > com.apple.print.PrintSettings.PMTotalBeginPages..n.=1"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > argv[6]="/private/var/spool/cups/d00044-001"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[0]="<CFProcessPath>"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[2]="CUPS_DATADIR=/usr/share/cups"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[6]="CUPS_SERV> > envp[11]="SERVER_ADMIN=root@..."
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[12]="SOFTWARE=CUPS/1.4.3"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[13]="TMPDIR=/private/var/spool/cups/tmp"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[14]="USER=root"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[15]="CUPS_SERVER=/private/var/run/cupsd"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[16]="CUPS_ENCRYPTION=IfRequested"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[17]="IPP_PORT=631"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[18]="CHARSET=utf-8"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[19]="LANG=en_US.UTF-8"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[20]="APPLE_LANGUAGE=en-US"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[21]="PPD=/private/etc/cups/ppd/Quad3880.ppd"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[22]="RIP_MAX_CACHE=8m"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[23]="CONTENT_TYPE=application/pdf"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[24]="DEVICE_URI=usb://EPSON/Epson%20Stylus%20Pro%203880?serial=0JU031001130242500"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[25]="PRINTER_INFO=Quad3880"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[26]="PRINTER_LOCATION=USB
>> > Printer"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[27]="PRINTER=Quad3880"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] envp[28]="CUPS_FILETYPE=document"
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > envp[29]="FINAL_CONTENT_TYPE=printer/Quad3880"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Started filter
>> > /usr/libexec/cups/filter/cgpdftoraster (PID 1331)
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Started filter
>> > /Library/Printers/QTR/filter/quadtoneprint (PID 1332)
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Started backend
>> > /usr/libexec/cups/backend/usb (PID 1333)
>> > D [10/May/2010:18:14:26 -0400] [Job 44] usb: AppleLanguages="en-US"
>> > D [10/May/2010:18:14:26 -0400] [Job 44] STATE: +connecting-to-device
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Looking for 'EPSON Epson Stylus Pro
>> > 3880'
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > `/private/var/spool/cups/d00044-001' has 1 pages.
>> > D [10/May/2010:18:14:26 -0400] [Job 44] cgpdftoraster - opened PPD file
>> > "/private/etc/cups/ppd/Quad3880.ppd"...
>> > D [10/May/2010:18:14:26 -0400] [Job 44] cgpdftoraster: size->width = 612,
>> > size->length = 792, size->top = 783, size->bottom = 9, size->left = 9,
>> > size->right = 603
>> > D [10/May/2010:18:14:26 -0400] [Job 44] cgpdftoraster: PreferredRotation =
>> > -90
>> > D [10/May/2010:18:14:26 -0400] [Job 44] cgpdftoraster - languageLevel = 2,
>> > mediaBox.size.width = 612, mediaBox.size.height = 792
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.plugin)
>> > (kr:0x00000000)
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin)
>> > (kr:0x00000000)
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Opening connection
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > load_classdriver(/System/Library/Printers/Libraries/USBGenericTOPrintingClass.plugin)
>> > (kr:0x00000000)
>> > D [10/May/2010:18:14:26 -0400] [Job 44]
>> > load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin)
>> > (kr:0x00000000)
>> > D [10/May/2010:18:14:26 -0400] [Job 44] STATE: -connecting-to-device
>> > D [10/May/2010:18:14:26 -0400] [Job 44] Sending print data...
>> > D [10/May/2010:18:14:26 -0400] [Job 44] skipBytesPerRow = 12
>> > D [10/May/2010:18:14:26 -0400] [Job 44] band width = 5940, bytesPerRow =
>> > 5952, band height = 1761, height = 7740
>> > D [10/May/2010:18:14:26 -0400] [Job 44] context width = 5940, height =
>> > 1761, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 5952, bitmapInfo
>> > = 0, resolution = (720.000000, 720.000000)
>> > D [10/May/

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.