QTR-Quadtone RIP

You can use QTR on an ethernet in several ways.

If the printer or print server has a fixed IP address you can just enter the
IP number during the install script.  However many setups have dynamically
set IP addresses -- i.e. they are assigned and may be different later.
There's a setup called Bonjour that can handle this automatically.  Most
of the newer Epson printers do support this although you may need to
enable it on the printer front panel.  If you can "see" the bonjour printer
in the OSX Print&Fax dialog it's very easy to use it for QTR.  See the
last page of the Tutorial.pdf for more details on this.

Roy

On Wed, Jul 8, 2009 at 11:36 AM, mberman89<j6mb@gilanet.com> wrote:
> I ran a script for QTR in profiles it gave me the option of using an IP address at the
> very end ... and it seems to have worked for Ethernet & QTR. Will let folks know. will check out p3000
>
> thanks
>
> --- In QuadtoneRIP@yahoogroups.com, "robert49brake" <robert49brake@...> wrote:
>>
>> --- In QuadtoneRIP@yahoogroups.com, "mberman89" <j6mb@> wrote:
>>
>> > Right now I am setting up a 7600 with Cones K7   .. and in a month I will bring a 9800 with similar inks on line. I am using a mac pro with osx 10.5.7 and photoshop CS4.
>> >
>> >
>> > I did all the set up work in the epson driver ...  and part of what I spent a great deal of time doing was figuring out the ethernet.  My office is very small ... so if at all possible I would like to use ethernet to get to my printers in the next room.  When I tried to use QTR I found no Ethernet option.  And have since noted it is set up for USB.  Is it possible to use ethernet??
>> >
>> >
>> > Also I noted - "Attention to Mac users of Photoshop CS4 and Lightroom 2.1 under OSX 10.5 Leopard There are color management problems with B&W printing with both Epson ABW and QTR"  I am using cs4 with osx 10.5 ...  is this still possible ... what kind of color management problems are we looking at. I updated everything for this project. My old mac died and my old photoshop was the first CS.
>>
>>
>> Hello Michael, QTR can only be used as a USB printer, no firewire or ethernet.  I'm still on CS3 so can't answer the CS4/10.5 question although it seems to be well documented and with solutions.  Have you searched or asked here:
>>
>> http://tech.groups.yahoo.com/group/piezography3000/messages?o=1&yguid=253793878
>>
>
>
>