QTR-Quadtone RIP

Hi Arnnad....   I would suggest you spend a bit of time at Clayton Jones's site..   particularly the section on papers and work flow .... think this a wee bit more complex that might be imagined on first glance... (~;

Bernard


http://www.cjcom.net/digiprnarts.htm



arnnad <arnnad@...> wrote: I'm inexperienced using this program and am puzzled why prints look 
flat and "blacks" are typically gray with less contrast than I'd expect.

I usually punch up saturation and/or contrast in the RGB original and 
the black/white conversion looks fine on my CRT monitor. Color prints 
closely match the monitor but not so with black/white. I know I could 
further darken the image in PSCS3 but it would be strictly a guess as 
to the printed result. The monitor is calibrated and I have no trouble 
with color printing.

I use an Epson 2200 and matte paper.

Thanks for your help


------------------------------------

Yahoo! Groups Links





       
---------------------------------
Ask a question on any topic and get answers from real people. Go to Yahoo! Answers.

[Non-text portions of this message have been removed]