QTR-Quadtone RIP

here it's my .qidf :

PRINTER=QuadR260-MIS
CURVE_NAME=MK-EPSON-ARCHIVAL-MATTE-6ink-140408
GRAPH_CURVE=YES
N_OF_INKS=6
DEFAULT_INK_LIMIT=
BOOST_K=
LIMIT_K=30
LIMIT_C=25
LIMIT_M=75
LIMIT_Y=5
LIMIT_LC=12
LIMIT_LM=25
N_OF_GRAY_PARTS=6
GRAY_INK_1=K
GRAY_VAL_1=100
GRAY_INK_2=M
GRAY_VAL_2=38,33
GRAY_INK_3=C
GRAY_VAL_3=29
GRAY_INK_4=LM
GRAY_VAL_4=16,66
GRAY_INK_5=LC
GRAY_VAL_5=11
GRAY_INK_6=Y
GRAY_VAL_6=5,66
GRAY_HIGHLIGHT=10
GRAY_SHADOW=10
GRAY_OVERLAP=
GRAY_GAMMA=1
GRAY_CURVE=
N_OF_TONER_PARTS=0
TONER_HIGHLIGHT=10
TONER_SHADOW=10
TONER_GAMMA=1
TONER_CURVE=
N_OF_TONER_2_PARTS=0
TONER_2_HIGHLIGHT=10
TONER_2_SHADOW=10
TONER_2_GAMMA=1
TONER_2_CURVE=
N_OF_UNUSED=0

thanks for the help Howard

Paolo


--- In QuadtoneRIP@yahoogroups.com, Howard Shaw <glassman@...> wrote:
>
> paolovertullo wrote:
>  > i didn't specifyed any black boost value.
>  > is it supposed to be valorized ? in this case what is a good starting
>  > point ?
>  >
> Paolo
> 
> It can't be black boost causing it then. Another variable that might 
> affect this is overlap. Perhaps it would be helpful if you could paste 
> your whole .qidf into a message.
> 
> By the way, I'm assuming that the 100% patch is a lot darker than the 
> 99% patch.
> 
> regards
> Howard
>