QTR-Quadtone RIP

I use a 2200 on a Win2000 machine and periodically have the same kind of  
problem. Sometimes it will print fine, other times it will get part way  
through a job and then slow down, way down, so that it makes a pass over  
the paper only every second or couple of seconds. It then takes a long  
time to finish the print. I have 512MB of memory and lots of disk space. I  
guess one way to look at it is that it gives the ink a long time to dry.
Steve

  On Sat, 05 Apr 2008 18:50:11 -0700, Tim Atherton <timatherton@...>  
wrote:

> I'm not sure if this was due to changes in printers or in versions of
> QTR, but when I used an Epson 2200, this was never a problem.
>
> Then I found that with an Epson 2400, QTR was taking forever to
> process and/or (I'm not exactly clear on what the actual process is
> it goes through...) spool prints
>
> Doesn't matter if they are 8x10 or 13x19 - the former just don't take
> quite so long. But for a 13x19, I'm talking 30+ minutes
>
> I recently got a 3800 and thought maybe it was just the interface
> with the 2400, but no - I get the same.
>
> I've tried various different connections - Firewire, USB, Network -
> same for each. I've also fiddled with all sorts of different Windows
> settings, but none made a difference.
>
> This is compared with using the Epson driver that for the same print
> takes maybe 4-5 minutes at most
>
> All on the same (somewhat old, but still fairly fast) Windows 2000
> machine
>
> Any ideas or suggestions (as I really like QTR...)
>
> thanks
>
> tim a
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>



-- 
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/