QTR-Quadtone RIP

the ONLY profiles (Not icc profiles) that come with QTR relevant to
the piezography systems like yours are those that start with K6, or K7
in their names. 

Someone else will have to pipe in about why what you tried won't
print, but even if it did it would be incorrect for the setup you have
asked about.

Regarding punch, I hear this a lot. It's a very open system in terms
of gradation all through the scale, you need to have a good monitor to
print match, and edit the snap into your files if that's what you want
from the print.

Tyler

--- In QuadtoneRIP@yahoogroups.com, "enggass" <enggass@...> wrote:
>
> Thanks.
> I was hoping for some tips. I am not getting great results with this
setup.
> Images lack punch! Any suggestions? Also, why does QTR include
QTR-RGB profiles?
> When I select one of these with a monochrome RGB image, it will not
print.
> Thanks,
> Steve
> 
> --- In QuadtoneRIP@yahoogroups.com, "Tyler Boley" <tyler@> wrote:
> >
> > http://www.piezography.com/support/default.htm
> > 
> > most of this is there.
> > 
> > --- In QuadtoneRIP@yahoogroups.com, "enggass" <enggass@> wrote:
> > >
> > > Hi,
> > > New to the group and I have a basic question.
> > > New to QTR and the K6 inks.
> > > Using Photoshop CS3
> > > Epson 1280
> > > What should my setup be??
> > > IMAGE: Grayscale Gamma 2.2? or RGB?
> > > Print Settings? Printer determine color? Rendering Intent? etc...
> > > I also am using Aperture which creates great 'monochrome'-rgb files.
> > > Would it be better to print these with the QTR-RGB Profiles?
> > > Any input would be great.
> > > Thanks,
> > > Steve
> > >
> >
>