QTR-Quadtone RIP

David,
Thank you!!
It's a bit confusing because there is another install file in that  
folder.
Thanks again,
Joel
On Feb 26, 2008, at 10:21 AM, dmwket wrote:

> Joel,
> It sounds, from your description, like the curve profiles have not  
> be installed for your QTR
> print driver.
>
> The following presumes you are using a MAC with at least Tiger. (The  
> exact folder
> structure I am describing is from Leopard.)
>
> In the QTR folder there is a profiles folder that has folders for  
> all the printers supported by
> QTR. These are also separated by the inks that are installed.
>
> For example my printer and ink combination is 2100-2200-UC. That is  
> the Epson 2200
> with Epson UltraChrome inks.
>
> Inside that folder are install applets for the 2100 and the 2200.  
> This is the folder where
> you have to place the curve file created using the process I  
> described in the document I
> uploaded.
>
> Clicking on the install program will build a series of files and  
> place them in a folder used
> by the QTR driver. This folder is accessible via the CurveDesign  
> folder in the QTR folder.
> In this folder is an alias to the CurveDropBox folder. In it is a  
> folder Quad2200 (or
> whatever printer you are using). In this folder there should be  
> a .quad file corresponding
> to each curve file you "installed". These are the the files used by  
> the QTR driver.
>
> I hope this helps.
>
> David
>
>
> 



[Non-text portions of this message have been removed]