QTR-Quadtone RIP

--- In QuadtoneRIP@yahoogroups.com, "rdpritchard" <rdpritchard@g...> wrote:
> --- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@h...> wrote:
> > --- In QuadtoneRIP@yahoogroups.com, "Chris Hargens" 
> <tzinzunzan2000@y...> 
> > wrote:
> > > According to the Piezography website, as well as John Cone's 
> message to 
> > > this group, complimentary K7 profiles have been created for the 
> 2200. 
> > > These profiles/curves work with QTR. Will these profiles be 
> > > downloadable with QTR, or perhaps as a separate K7 curves folder 
> from 
> > > the QTR website, or will they be downloadable from the 
> Piezography 
> > > website?
> > > 
> > > Chris Hargens
> > 
> > Hi Chris,
> > 
> > The K7 profiles will be included in the standard QTR package.
> > 
> > I just received some new profiles and until new full package is done
> > I've put the profiles as a separate zip file that you can download 
> and
> > install.  See the 2.3 beta download page:
> >    http://homepage.mac.com/royharrington/FileSharing3.html
> > 
> > The download is a .zip file that is good on either Mac or PC.  
> Unzip the
> > file and place the .quad files into:
> > Mac:     CurveDesign/CurveDropBox/Quad2200
> > PC:       Program Files\QuadToneRIP\quadtone\Quad2200
> > 
> > On the Mac also run "Run-Install-Curves"
> > 
> > Roy
> 
> Roy, thanks to you and John Cone for making these available.  I was 
> able to get them to the right folder (Windows) and can load them as 
> curves in the main QTRgui window, but can't see them in 
> CurveCreation.  Is there another step to installing them as 
> viewable/editabl curves in a Windows system?
> 
> Thanks,
> 
> Bob

The Cone-supplied curves are not in the editable .qidf format just
the binary .quad format.  You should be able to view the actual
curves however in QTRgui by right clicking on the curve.  There is one
curve that I did K7-Photo-Rag that does have the .qidf file.  (This is
in the 2.3 version not previous versions).  Use this as a model if you
want to make your own.


Roy