QTR-Quadtone RIP

Thanks Roy.  I'll try that.  I am using R2400. Adobe CS - version 8. QTR
2.4.3.  Should I download 2.5.2?

I tried to delete QTR from the downloaded file but was informed I was not
able to do so.  I'll try the technique you recommend.

I am not familiar how to generate the DiagnosticScript output.

I have to run out at this moment so I will get back to you later.  Many
thanks.  Joe



On Dec 12, 2007 3:04 PM, Roy Harrington <roy@...> wrote:

>   I've been printing without any trouble -- CS3 and Leopard.
> It sounds like you have all downloaded 2.5.2 and also installed the
> Leopard.
> That's good. But another thing is that if you had the Leopard install
> migrate
> your Quad printers I think it misses something important.
>
> So you should Delete the Quad printer in System Prefs > Print & Fax.
> Then go back to the download and re-run the appropriate printer/ink
> install
> script.
> For instance if you had an R2400 with UC inks, run
> Profiles/R2400-UC/InstallR2400
>
> Let me know if you still have trouble. Attach a DiagnosticScript output.
>
> Roy
>
>
> On Dec 12, 2007 11:36 AM, studio9chik <fotochik@...<fotochik%40gmail.com>>
> wrote:
>
> > i've tried just about everything ... still get the same message as below
> > "printing page 1,
> > x%" ... then out comes the paper. 'tis a mystery
> >
> >
> > --- In QuadtoneRIP@yahoogroups.com <QuadtoneRIP%40yahoogroups.com>,
> "klmul" <klmul@...> wrote:
> > >
> > > Hey there,
> > >
> > > I am having the same problem. I am using QTR 2.5.2 with the patch
> > > installed on a Leopard system. When I print either from CS3 or
> > > Preview the print job is shown in the printer dialogue but I only get
> > > the message: "Printing page 1, 5%". The number of percent varies from
> > > time to time, but none of my trials was succesful. I am using MIS
> > > UTR800 and an Epson R800.
> > >
> > > I reinstalled QTR and the patch, but without deinstalling before as
> > > the uninstall package wouldn't work as it said I had a newer version
> > > of QTR installed, supposedly the patch.
> > >
> > > Any help would be greatly appreciated.
> > >
> > > Thanks a lot!
> > >
> > > --- In QuadtoneRIP@yahoogroups.com <QuadtoneRIP%40yahoogroups.com>,
> "unclejoeho" <unclejoeho@>
> > > wrote:
> > > >
> > > > Greetings. I am running MAC version 10.5.1 Leopard. Am I able to
> > > > utilize QTR? I did the dowload and was trying to test it out before
> > > > paying for it but have some problems.
> > > >
> > > > Are there any special installation issues I need to be aware of? I
> > > > have installed it and it seems that all went according to plan -
> > > but I
> > > > cannot get a print to complete.
> > > >
> > > > I select QuadToneRip as the printer, make selections in the print
> > > > dialogue section and hit print. The QTR image appears in the dock,
> > > > bounces up and down, and when I select it I get the following
> > > message:
> > > >
> > > > usr/libexec/cups/filter/quadtoneprintfailed
> > > >
> > > > Any ideas?
> > > >
> > > >
> > > > Many thanks, Joe Hoyt, Miami, FL
> > > >
> > >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> [Non-text portions of this message have been removed]
>
>  
>



-- 
Signed:  Joseph N. Hoyt, II
Telephone: 305-979-2300


[Non-text portions of this message have been removed]