QTR-Quadtone RIP

Thank you for the reply. Do you know of the type of Cone ink that 
would be compatible with Harman paper and run on 7000 or 4800?

Thank you again, 
Sergey Zlotnikov

--- In QuadtoneRIP@yahoogroups.com, "Roy Harrington" <roy@...> wrote:
>
> The Harman paper takes a photo black ink not a matte ink.  The 
current K6 inks
> aren't compatible.  They have some new inks that will work.
> 
> Roy
> 
> On 11/2/07, Sergey Zlotnikov <szlotnikov@...> wrote:
> > I got my pack of Harman FB Al and was very excited. Until I tried 
to
> > create a curve for it. First impression - My x-rite 810 reads 100%
> > black from QTR calibration printout at 2.42 vs. 1.89 on German 
Etching
> > paper. The bad news, my cyan patch shows more density after 70% 
than
> > black patch. Black shows more density before 70% mark. I am lost 
with
> > that one. I also have a cartridge of Museum Black, maybe I should 
try
> > to put that in and print. My previous custome curve creation for 
the
> > same ink on German etching went normal, ink maxed out at 55%, but 
with
> > Harman, I can clearly see ink not maxing till 65 - 70%
> > Any Ideas or experience?
> > Thank you,
> > sergey Zlotnikov
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>